Creator of Composite Diamond Coating®

Surface Technology, Inc. is the creator and technical leader of CDC - Composite Diamond Coating®, an exceptionally engineered coating of electroless nickel with fine diamond. The synergy of these materials makes CDC an exceptionally hard and wear resistant coating. CDC conforms to even the most complex geometries and is an excellent replacement for chrome plating. STI makes CDC available via coating services from its production facility as well as chemical products sold directly, through a network of distributors, and by agreement with licensees worldwide.

AddPlate® and NiPlate™ 130

A HIGH SPEED, MEDIUM PHOSPHOROUS, ELECTROLESS NICKEL PLATING PROCESS

The 130 system is an economical, high speed, electroless nickel process designed to deposit a uniform, nickel-phosphorous alloy onto a great variety of metals, alloys, and non-conductors.

The 130 system is available in two packaging options to best meet your needs. The NiPLATE option provides the greatest convenience to the user, while the ADDPLATE® option provides the greatest economy for shipping and use. Both options produce the same properties and quality.

  • The NiPLATE 130 option is supplied in three liquid concentrates: NiPLATE 130 A and 130 B are used for make-up, and NiPLATE 130 A and 130 C are used for replenishment.
  • The ADDPLATE® 130 option is supplied in two liquid concentrates: ADDPLATE® 130 M is used for bath make up with standard nickel sulfate and sodium hypophosphite commodities, and ADDPLATE® 130 R is used for replenishment of the bath with the same standard nickel sulfate and sodium hypophosphite commodities. 

Some advantages of the 130 system are: high speed, bright deposit, ease of use, improved corrosion resistance, ammonia free make-up, excellent stability, long bath life, and consistent plating rate. The 130 system electroless nickel processes meet or exceed MIL-C-26074D and AMS 2404C.

Typical Deposit Properties:

Phosphorous Content 5-8% by wt.
Hardness:  
o as plated 550 VHN100
o heat treated @ 400°C for 1 hr. 900 VHN100
Salt Spray (ASTM-B-117) 100-120 hrs.
Stress slightly tensile
Magnetic Properties slightly magnetic
Deposition rate 0.8 - 1.0 mil per hour

Preferred Operating Conditions:

  Range Optimum
Solution Temperature 88°- 94°C (190°-200°F) 92°C(195°F)
Solution pH 4.6 - 5.6 5.2
Bath Loading 0.3 - 1.0 ft2/gal 0.6 ft2/gal
Nickel Metal Concentration 0.65 - 0.85 oz/gal 0.8 oz/gal
H2PO2 Concentration 3.5 - 4.5 oz/gal 4.0 oz/gal
Agitation Mechanical or Filtered Air  

Consult a Surface Technology, Inc. Sales or Technical Service Representative for further information about this or any of our products and services.

A Leader
in the Metal Finishing Industry

609-259-0099